PRE-SOAK
DEBUGGER
PRODUCT DESCRIPTION
Pre-Soak
Debugger is a biodegradable product that removes baked on bugs from
cars, buses, trucks, trailers and other equipment. This liquid cleaner
can be used through pressure washers, automatic car wash systems, self-service
car washes or manually. Formulated with powerful surfactants, detergents,
emulsifiers and water conditioners, it will penetrate and remove dirt,
oil, grease and carbonized matter. It’s also effective as a pre-spray
in full service car washes.
DILUTION INFORMATION
Light Soil: 1 to 2 ounces of cleaner per gallon of water.
Heavy Soil: 2 to 4 ounces of cleaner per gallon of water.
Debugging: 24 ounces of cleaner per gallon of water.
 |
 |
 |
|
 |
 |
Biodegradable |
|
Economical and effective at low concentrations |
|
Works
on bugs, dirt, grease |
|
Fast
acting |
|
No clogging of nozzles |
|
APPLICATION
Spray or foam onto cars, trucks, trailers, buses and equipment. Let
solution stand for 1 to 3 minutes. Pressure rinse with clean water or
proceed to the next step in the washing cycle. Results are better if
washing in not done in direct sunlight.
SAFETY
Must read MSDS
before using product. Use precautions when handling product. Always
wear eye protection, gloves, apron other recommended personal protection.
